Major Components; Positioner; Figure 1-3 Positioners - Will Burt POSITIONIT PI-150 Operator's Manual

1.6 Major Components

The major components of the system are:
•

Positioner

•
Controller
•
Power/Data Cable
•
Positioner Power Supply
•
Step Up Converter
•
Step Down Converter
1.6.1 Positioner
The positioner comes in (2) models (Figure 1-3), the PI-150 (P/N: 5061001) and the PI-75
(P/N: 5191201). The pan and tilt positioner:
•
Is made of die-cast aluminum casing
•
Uses stainless steel fasteners
•
Has weather and dust proofing to an IP68 rating
•
Is designed to minimize backlash
•
Is configured to run on RS485 data using Pelco D protocol
•
Contains an internal tether to prevent the pan and tilt head from separating from the
mast in the event of an impact load separating the pan and tilt head from the base
•
Ships with the PositionIt PI-150 and PI-75 Operator's Manual (this manual)
Base
Pan and
Tilt Head
PI-150
TP-5129001-J
January 2022
Payload
Platform
Removable
Plug on Side
Egress
Mounting
Pedestal
(Bottom Egress on Underside of
Mounting Pedestal)

Figure 1-3 Positioners

I PI-150
P OSITION T AND
PI-75
PI-75
1-5