Mounting The Payload; Figure 2-14 Pi-150 Payload Mounting Hole Pattern; Figure 2-15 Pi-75 Payload Mounting Hole Pattern - Will Burt POSITIONIT PI-150 Operator's Manual

I PI-150
P OSITION T AND

2.7 Mounting the Payload

This section discusses mounting the payload.
Safety Instruction – Mounting Instructions! Before operation, be certain the positioner is
capable of resisting forces generated from all loading and environmental conditions including,
but not limited to payload size and weight, sail size, and wind and ice loading. The mounting
hardware must include proper means to resist vibration loosening such as thread-locking
compound or locking hardware. Mounting the payload into a positioner unable to resist the
forces generated from the customer-specific loading scenario could result in death or serious
injury, and could damage the positioner.
To attach the payload:
1. Ensure power to the system is off while installing the payload.
2. Reference the mounting hole patterns for the payload:
•

Figure 2-14 PI-150 Payload Mounting Hole Pattern

•

Figure 2-15 PI-75 Payload Mounting Hole Pattern

3. Position the payload on the mounting plate.
4. Connect the payload to the top of the positioner with appropriate hardware. Torque all
hardware as appropriate for its material and size. The mounting hardware must include
proper means to resist vibration loosening such as thread-locking compound, or locking
hardware.
2-12
PI-75
Figure 2-14 PI-150 Payload Mounting Hole Pattern
TP-5129001-J
January 2022