Additional Documentation; Definitions Of Terms And Symbols; Figure 1-1 Home Position (Pi-150 Shown) - Will Burt POSITIONIT PI-150 Operator's Manual

I PI-150
P OSITION T AND

1.3 Additional Documentation

In addition to this manual, the controller ships with the controller manual. Reference this manual
for additional information on the function of the controller.

1.4 Definitions of Terms and Symbols

Throughout this manual, the following will be used:
General Terms:
•
Positioner refers to the PositionIt (both PI-150 and PI-75).
•
Controller refers to the default joystick controller (P/N: 5098901).
•
System refers to the entire positioner and controller system.
•
Payload refers to the object or equipment being moved by the positioner.
Positions
•
Home (Figure 1-1) to refer to the factory set preset position [0] (zero) which is set to
move the positioner to the mid-point of both the pan and tilt. In this position, the tilt
platform will be horizontal, and the pan axis will be in the center position. In this position,
the rear of the positioner is the side facing the side egress on the mounting pedestal.
Note that the offset on the left of the positioner, as you face the side egress, is wider
than the offset to the right. The positioner ships in the home position.
Note That the Left Offset
is Wider Than the Right
1-2
PI-75

Figure 1-1 Home Position (PI-150 Shown)

Side Egress
TP-5129001-J
January 2022