Enabling Record Control - Dahua DH-XVR5104HS-4KL-I3 User Manual

5.7.1 Enabling Record Control

Manual recording operation requires the user have the permission to access STORAGE settings.

Check to ensure the HDD installed in the Device has been formatted properly.

To enter the record control page, do the following:
Right-click on the live view screen, the shortcut menu is displayed. On the shortcut menu,
select Manual Control > Record Control.
Configure the settings for the record control parameters.
Parameter
Channel
Main Stream/Sub
Stream
Snapshot
Click Apply.
Record mode
Table 5-24 Record control parameters
Description
Displays all the analog channels and the connected digital channels. You can
select a single channel or select All.
Auto: Automatically record according to the record type and recording
time as configured in the recording schedule.
Manual: Keep general recording for 24 hours for the selected channel.
Stop: Do not record.
Enable or disable the scheduled snapshot for the corresponding channels.
129
User's Manual