Dahua DH-XVR5104HS-4KL-I3 User Manual page 66

Parameter
Date Separator
Time Format
DST
Start Time
End Time
NTP
Serve Address
Port
Interval
5.1.4.4 Configuring Network Settings
You can configure the basic network settings such as net mode, IP version, and IP address of the Device.
You can also configure network settings by selecting Main Menu > NETWORK > TCP/IP.
After you have configured the date and time settings, on the Date &Time page, click Next.
Configure the settings for network parameters.
Description
In the Date Separator list, select a separator style for the date.
In the Time Format list, select 12-HOUR or 24-HOUR for the time display
style.
Enable the Daylight Saving Time function. Click Week or click Date.
Configure the start time and end time for the DST.
Enable the NTP function to sync the Device time with the NTP server.
If NTP is enabled, device time will be automatically synchronized with
server.
In the Server Address box, enter the IP address or domain name of the
corresponding NTP server.
Click Manual Update, the Device starts syncing with the server
immediately.
The system supports TCP protocol only and the default setting is 123.
In the Interval box, enter the amount of time that you want the Device to
sync time with the NTP server. The value ranges from 0 to 65535.
TCP/IP
57
User's Manual