Dahua DH-XVR5104HS-4KL-I3 User Manual page 170

Parameter
Sub Screen
Video Matrix
Buzzer
Log
Alarm Tone
White Light
Siren
Click Apply to save the settings.
Click Default to restore the default setting.

Click Copy to, in the Copy to dialog box, select the additional channel(s) that you want

to copy the motion detection settings to, and then click Apply.
Click Test to test the settings.

Setting the Motion Detection Region
Next to Region, click Setting.
Point to the middle top of the page.
Configure the regions settings. You can configure totally four regions.
1) Select one region, for example, click
2) Drag on the screen to select the region that you want to detect.
The selected area shows the color that represents the region.
3) Configure the parameters.
Description
Select the checkbox to enable the function. When an alarm event occurs,
the extra screen outputs the settings configured in Main Menu >
DISPLAY > Tour > Sub Screen.
Not all models support this function.

To use this function, extra screen shall be enabled.

Select the checkbox to enable the function. When an alarm event occurs,
the video output port outputs the settings configured in Main Menu >
DISPLAY > Tour.
Not all models support this function.
Select the checkbox to activate a buzzer noise at the Device.
Select the checkbox to enable the Device to record a local alarm log.
Select to enable audio broadcast/alarm tones in response to a motion
detection event.
Select the checkbox to enable white light alarm of the camera.
Select the checkbox to enable sound alarm of the camera.
Detection setting
161
.
User's Manual