Dahua DH-XVR5104HS-4KL-I3 User Manual page 165

Click Apply to save the settings.
5.10.3.2 Configuring White Light
When the motion detection alarm is activated, the system links the camera to generate white light
alarm.
To use this function, connect at least one white light camera to your Device.
Select Main Menu > ALARM > Alarm-out Port > White Light.
Configure the settings for the white light parameters.
Parameter
Channel
Delay
Mode
Flicker Frequency
Click Apply to complete the settings.
White light
Table 5-29 White light parameters
Description
In the Channel list, select a channel that is connected to a white light
camera.
Set a length of time for the Device to delay turning off alarm after the
alarm is cancelled. The value ranges from 5 seconds to 30 seconds, and
the default value is 5 seconds.
Set the alarm mode of white light to be Always on or Flicker.
When setting the alarm mode of white light to be Flash, you can select
the flash frequency from Low, Middle, and High.
156
User's Manual