Dahua DH-XVR5104HS-4KL-I3 User Manual page 97

Configure the settings for the tour parameters for both Main Screen and Extra Screen.
Parameter Description
Enable Enable tour function.
Enter the amount of time that you want each channel group displays on the
Interval (Sec.) screen. The value ranges from 5 seconds to 120 seconds, and the default
value is 5 seconds.
Motion Tour, Alarm Select the View 1 or View 8 for Motion Tour and Alarm Tour (system alarm
Tour events).
In the Live Layout list, select View 1, View 4, View 8, or other modes that are
Live Layout
supported by the Device.
Display all channel groups under the current Window Split setting.
Channel Group
Click Apply to save the settings.
Sub screen
Tour parameters
Add a channel group: Click Add, in the pop-up Add Group channel,
select the channels to form a group, and then click Save.
Delete a channel group: Select the checkbox of any channel group, and
then click Delete.
Edit a channel group: Select the checkbox of any channel group and
then click Modify, or double-click on the group. The Modify Channel
Group dialog box is displayed. You can regroup the channels.
Click Move up or Move down to adjust the position of channel group.
88
User's Manual