Enabling Record Control - Dahua DH-XVR4104C-X User Manual

5.7.1 Enabling Record Control

 Manual recording operation requires the user have the permission to access STORAGE
settings.
Check to ensure the HDD installed in the Device has been formatted properly.

To enter the record control interface, do the following:
Step 1 Right-click on the live view screen, the shortcut menu is displayed. On the shortcut
menu, select Manual > Record Control. The RECORD interface is displayed, see
Figure 5-88.
Step 2 Configure the settings for the record control parameters. See Table 5-31.
Parameter
Channel
Record status
Snapshot status
Step 3 Click Apply.
Figure 5-88
Description
Displays all the analog channels and the connected digital channels.
You can select a single channel or select All.
Auto: Automatically record according to the record type and

recording time as configured in the recording schedule.
Manual: Keep general recording for 24 hours for the selected

channel.
Stop: Do not record.

Enable or disable the scheduled snapshot for the corresponding
channels.
Table 5-31
Local Configurations 118