Dahua DH-XVR5104HS-4KL-I3 User Manual page 207

3) Configure the settings for the parameters of drawing rules.
Parameter
Name
Action
Direction
Target Filter
Effective Target
4) Drag to draw an area.
5) Click OK to save the settings.
Click to set the actions to be triggered.
Select the Enable checkbox, and then click Apply.
Intrusion rule
Intrusion parameters
Description
Enter the customized rule name.
Configure the actions that are defined as intrusion. You can select the
Appear checkbox and the Cross checkbox.
In the Direction list, select the direction of crossing the configured area.
You can select Enter&Exit, Enter, and Exit.
Click to draw areas to filter the target.
You can configure two filtering targets (maximum size and minimum size).
When the target that is crossing the tripwire is smaller than the minimum
size or larger than the maximum size, no alarms will be activated. The
maximum size should be larger than the minimum size.
Enable the AI Recognition function (
Motor Vehicle are selected for alarm object.
198
User's Manual
). By default, Human and