Dahua DH-XVR5104HS-4KL-I3 User Manual page 283

Parameter
Enable
SMTP Server
Port
Username
Password
Anonymous
Receiver
Email Address
Sender
Subject
Attachment
Encryption Type
Sending Interval (sec.)
Health Mail
Sending Interval (Min.)
Test
Click Apply to complete the settings.
5.15.1.8 Configuring UPnP Settings
You can map the relationship between the LAN and the WAN to access the Device on the LAN through
the IP address on the WAN.
Description
Enable the email function.
There might be risk of sending data to specified email address after it is
enabled.
Enter the address of SMTP server of sender's email account.
Enter the port value of SMTP server. The default value setting is 25. You
can enter the value according to your actual situation.
Enter the user name and password of sender's email account.
If enable the anonymity function, you can login as anonymity.
In the Receiver list, select the number of receiver that you want to receive
the notification. The Device supports up to three mail receivers.
Enter the email address of mail receiver(s).
Enter the sender's email address. It supports maximum three senders
separated by comma.
Enter the email subject.
Supports Chinese, English and numerals. It supports maximum 64
characters.
Enable the attachment function. When there is an alarm event, the system
can attach snapshots as an attachment to the email.
Select the encryption type: NONE, SSL, or TLS.
For SMTP server, the default encryption type is TLS.
This is the interval that the system sends an email for the same type of
alarm event, which means, the system does not send an email upon any
alarm event.
This setting helps to avoid the large amount of emails caused by frequent
alarm events.
The value ranges from 0 to 3600. 0 means that there is no interval.
Enable the health test function. The system can send a test email to check
the connection.
This is the interval that the system sends a health test email.
The value ranges from 30 to 1440. 0 means that there is no interval.
Click Test to test the email sending function. If the configuration is correct,
the receiver's email account will receive the email.
Before testing, click Apply to save the settings.
274
User's Manual