Dahua DH-XVR5104HS-4KL-I3 User Manual page 130

Select the checkbox of the device.
Click Add.
The device is added into the Added Device area.
You can also double-click the device to add it into the Added Device area.

You can add devices in batches.

5.6.1.3 Adding Remote Devices Manually
On the Add Camera page, click Manual Add.
Configure the settings for the manual adding device parameters.
Parameter
Channel
Manufacturer
IP Address
RTSP Port
HTTP Port
TCP Port
Manual add
Manual add parameters
Description
In the Channel list, select the channel that you want use on the Device to
connect the remote device.
In the Manufacturer list, select the manufacturer of the remote device.
In the IP Address box, enter the IP address of remote device.
The default is 192.168.0.0 which the system cannot connect to.
The default value setting is 554. You can enter the value according to your
actual situation.
The default value setting is 80. You can enter the value according to your
actual situation.
If you enter other value, for example, 70, and then you should enter 70 after
the IP address when logging in the Device by browser.
The default value setting is 37777. You can enter the value according to your
actual situation.
121
User's Manual