2.3.1.2.
Low version head unit (1 X 4pin HSD)
Disconnect the single female 4pin HSD connector of the vehicle harness
at the rearside of the head unit and connect it to the 4pin HSD connector
„Low version HU – to vehicle harness"
Carefully cut the harness' shrink pipe which sheathes both of the
waterblue
colored 4pin HSD connectors, to set free the connector
„Low version – connect to head unit"
Connect the
waterblue
„Low version – connect to head unit"
4pin HSD connector at the rearside of the head unit.
Connect the
waterblue
waterblue
colored 4pin HSD connector of the video interface.
Version 02.02.2018
of the enclosed 4pin HSD harness.
for the low version head unit.
colored female 4pin HSD connector
to the previously become free black
colored female 4pin HSD connector
HW:CAM-GD (V94)
„to interface"
to the
RL3-NAC