Table of Contents
Advertisement
2. Installation
Switch off the ignition and disconnect the vehicle's battery! The interface needs a
permanent 12V source. If -according to factory rules- a disconnection of the battery has to
be avoided, it should be sufficient to use the vehicle's sleep-mode. In case, the sleep-mode
doesn't succeed, the battery has to be disconnected with a resistor lead.
The Interface needs a permanent power supply! If power isn't directly taken from the
battery, the connection's power has to be checked for being start-up proven and
permanent.
Before the final installation, we recommend a test-run of the interface. Due to changes in
the production of the vehicle manufacturer, there's always the possibility of
incompatibility.
2.1.
Place of installation – video-interface
The video-interface is performed to be installed at the head unit's rear side.
Version 02.02.2018
HW:CAM-GD (V94)
RL3-NAC
Advertisement
Table of Contents
