Connection To The Head-Unit; Installation Of The Exchange - Retaining Plate And The Daughter Pcb - r.LiNK CI-RL3-R40 Manual

Video-inserter with 2 video inputs, rear-view camera input and can control

Table of Contents

2.3.

Connections to the head-unit

2.3.1. Installation of the Exchange – retaining plate and the daughter PCB

Remove the Original monitor retaining plate and replace it with the exchange

retaining-plate by using the original screws.

Version 16.03.2020

Remove the head-unit and further remove the

original housing cover plate, which is fixed to the

head-unit housing by 5 Torx screws (T9).

Turn out the 4 screws of the monitor retaining

plate, after carefully unklipping the 66pin and

the 9pin ribbon cables.

Note: The connected ribbon cables have to be

handled with care to avoid each damage of the

sensitive electrical inducters (Refer also to

chapter "Connecting the ribbon cables")

HW: CAM(V97)/(V30)

CI-RL3-R40

Table of Contents