Led Indicators - Weidmuller IE-SW-PL16M Series Hardware Installation Manual

ST-Port Pinouts
SC-Port Pinouts
ATTENTION
This is a Class 1 Laser/LED product. To prevent damage to your
eyes, do not stare directly into the laser beam.

LED Indicators

The front panel of IE-SW-PL16M contains several LED indicators. The
function of each LED is described in the following table:
LED Color State
On
PWR1 AMBER
Off
On
PWR2 AMBER
Off
On
FAULT RED
Off
On
MSTR/HEAD GREEN Blinking
Off
Description
Power is being supplied to power input
P1.
Power is not being supplied to power
input P1.
Power is being supplied to power input
P2.
Power is not being supplied to power
input P2.
When the corresponding PORT alarm is
enabled, and a user-configured event is
triggered.
When the corresponding PORT alarm is
enabled and a user-configured event is
not triggered, or when the
corresponding PORT alarm is disabled.
When the switch is set as the Master of
the Turbo Ring, or as the Head of the
Turbo Chain.
The switch has become the Ring Master
of the Turbo Ring, or the Head of the
Turbo Chain, after the Turbo Ring or
the Turbo Chain is down.
When the switch is not the Master of
this Turbo Ring or is set as the Member
of the Turbo Chain.
- 12 -