Redundant Power Inputs; Dip Switch Settings; Led Indicators - Weidmuller IE-SW-BL05T-5TX Hardware Installation Manual

ATTENTION
This is a Class 1 Laser/LED product. To avoid causing
serious damage to your eyes, do not stare directly into the
Laser Beam.

Redundant Power Inputs

Both power inputs can be connected simultaneously to live DC power
sources. If one power source fails, the other live source acts as a backup,
and automatically supplies all of the Ethernet Switch's power needs.

DIP Switch Settings

IE-SW-BL05/08 Series DIP Switches
DIP Switch
----
BSP
ATTENTION
To actively update DIP switch settings, power off and then
power on the Ethernet Switch.

LED Indicators

The front panel of the Ethernet Switch contains several LED indicators.
The function of each LED is described in the table below.
LED Color
PWR1 AMBER
PWR2 AMBER
10M YELLOW
100M GREEN
The default setting for each DIP Switch is OFF.
The following table explains the effect of
setting the DIP Switches to the ON positions.
Setting
– Serves no function (reserved for future use).
ON Enables broadcast storm protection
OFF Disables broadcast storm protection
State
Power is being supplied to power input
On
PWR1.
Power is not being supplied to power input
Off
PWR1.
Power is being supplied to power input
On
PWR2.
Power is not being supplied to power input
Off
PWR2.
On Port's 10 Mbps link is active.
Blinking Data is being transmitted at 10 Mbps.
Off Port's 10 Mbps link is inactive
On Port's 100 Mbps link is active.
Blinking Data is being transmitted at 100 Mbps.
Off Port's 100Mbps link is inactive.
Description
Description
- 13 -