Table of Contents
Advertisement
Quick Links
Ethernet Switch – Premium Line
IE-SW-PL16M Series (Managed)
Hardware Installation Guide
Fourth Edition, October 2012
1243370000/03/10.12
Please note:
This document, the detailed manual and any further
product information - if available - can be
downloaded at the internet link:
http://www.weidmueller.com/downloads
Copyright Notice
Copyright
2012 Weidmüller Interface GmbH & Co. KG
All rights reserved.
Reproduction without permission is prohibited.
Advertisement
Table of Contents
Related Manuals for Weidmuller IE-SW-PL16M Series
Summary of Contents for Weidmuller IE-SW-PL16M Series
- Page 1 Ethernet Switch – Premium Line IE-SW-PL16M Series (Managed) Hardware Installation Guide Fourth Edition, October 2012 1243370000/03/10.12 Please note: This document, the detailed manual and any further product information - if available - can be downloaded at the internet link: http://www.weidmueller.com/downloads...
-
Page 2: Package Checklist
Package Checklist Your Ehernet Switch is shipped with the following items. If any of these items are missing or damaged, please contact your Weidmüller customer service for assistance. 1 Ethernet Switch IE-SW-PL16M Hardware Installation Guide CD-ROM with User’s Manual and Windows Utility (option) ... - Page 3 Panel Views of IE-SW-PL16M-16TX Grounding screw Console port Heat dissipation orifices 6-pin terminal block for DI 1, DI 2, and PWR 2 6-pin terminal block for PWR1 Relay 1, and Relay 2 10/100BaseT(X), ports 1 to 16 PWR 1: LED for power input 1 PWR 2: LED for power input 2 Fault LED 10.
- Page 4 Panel Views of IE-SW-PL16M-14TX-2SC/2ST NOTE: The appearance of the switch IE-SW-PL16M-14TX-2ST is - apart from the optical connectors - identical to IE-SW-PL16M-14TX-2SC Grounding screw Console port Heat dissipation orifices 6-pin terminal block for DI 1, DI 2, and PWR 2 6-pin terminal block for PWR1 Relay 1, and Relay 2 10/100BaseT(X), ports 1 to 14...
-
Page 5: Mounting Dimensions (Unit = Mm)
Mounting Dimensions (unit = mm) DIN-Rail Mounting The aluminum DIN-Rail attachment plate should already be fixed to the back panel of IE-SW-PL16M when you take it out of the box. If you need to reattach the DIN-Rail attachment plate to IE-SW-PL16M, make sure the stiff metal spring is situated towards the top, as shown by the following figures. -
Page 6: Atex Information
ATEX Information 1. Certification number DEMKO 11 ATEX 150191X 2. Ambient range (-40°C ≤ Tamb ≤ 75°C) 3. Certification string (Ex nC IIC T4) 4. Standards covered ( EN60079-0:2006, EN60079-15:2005) 5. The conditions of safe usage: The Ethernet Communication Devices are to be mounted in an IP54 enclosure and used in an area of not more than pollution degree 2 as defined by IEC60664-1. -
Page 7: Grounding The Ethernet Switch
You should also pay attention to the following points: Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must cross, make sure the wires are perpendicular at the intersection point NOTE: Do not run signal or communications wiring and power wiring through the same wire conduit. -
Page 8: Wiring The Redundant Power Inputs
In this section, we present two types of diagrams—Pinout Diagrams and Cable Wiring Diagrams—to convey information about the ports and the cables used to connect IE-SW-PL16M Series to other devices: Pinouts—The meaning of the “Pinouts” diagrams is straightforward. The diagrams simply display the type of signal passing through each of the port’s pins. - Page 9 Refer to the following Pinout and Cable Wiring diagrams to see how RJ45 pins are numbered RS-232 Connection IE-SW-PL16M Series has one RS-232 (10-pin RJ45) console port, located on the top panel. Use either an RJ45-to-DB9 or RJ45-to-DB25 cable (see the cable following wiring diagrams) to connect IE-SW-PL16M Series console port to your PC’s COM port.
-
Page 10: 10/100Baset(X) Ethernet Port Connection
RJ45 (10-pin) to DB9 (F) Cable Wiring Server RJ45 (10-pin) to DB25 (F) Cable Wiring Server 10/100BaseT(X) Ethernet Port Connection The 10/100BaseT(X) ports located on Ethernet Switch’s front panel are used to connect to Ethernet-enabled devices. Most users will choose to configure these ports for Auto MDI/MDI-X mode, in which case the port’s pinouts are adjusted automatically depending on the type of Ethernet cable used (straight-through or cross-over), and the type of device (NIC-type or... -
Page 11: 100Basefx Ethernet Port Connection
RJ45 (8-pin, MDI) Port Pinouts Signal RJ45 (8-pin, MDI-X) Port Pinouts Signal RJ45 (8-pin) to RJ45 (8-pin) Straight-through Cable Wiring RJ45 (8-pin) to RJ45 (8-pin) Cross-over Cable Wiring 100BaseFx Ethernet Port Connection The concept behind the SC/ST port and cable is quite straightforward. Suppose you are connecting devices I and II. -
Page 12: Led Indicators
ST-Port Pinouts SC-Port Pinouts ATTENTION This is a Class 1 Laser/LED product. To prevent damage to your eyes, do not stare directly into the laser beam. LED Indicators The front panel of IE-SW-PL16M contains several LED indicators. The function of each LED is described in the following table: Color State Description... -
Page 13: Specifications
When the switch coupling function is enabled to form a back-up path, or when it's set as the Tail of the Turbo Chain. CPLR/TAIL GREEN Blinking When the Turbo Chain is down. When the switch disables the coupling function. TP port’s 10 Mbps link is active. GREEN Blinking Data is being transmitted at 10 Mbps. - Page 14 Digital Input Two inputs with the same ground, but electrically isolated from the electronics • For state “1”: +13 to +30V • For state “0”: -30 to +3V • Max. input current: 8 mA Power Input Voltage 24 VDC (12 to 45 VDC), redundant inputs Input Current (@24V) IE-SW-PL16M-16TX: Max.
- Page 15 WARRANTY 5 years Weidmüller gives a 5 year warranty on this product in accordance with the warranty terms as described in the general conditions of sale of the Weidmüller company which has sold the products to you. Weidmüller warrants to you that such products the defects of which have already existed at the time when the risk passed will be repaired by Weidmüller free of charge or that Weidmüller will provide a new, functionally equivalent product to replace the defective one.