Table of Contents
Advertisement
Quick Links
Ethernet PoE Switch - Premium Line
IE-SW-PL06M-2TX-4PoE (Managed)
Hardware Installation Guide
Second Edition, October 2012
1254050000/01/10.12
Please note:
This document, the detailed manual and any further
product information - if available - can be
downloaded at the internet link:
http://www.weidmueller.com/downloads
Copyright Notice
Copyright
2012 Weidmüller Interface GmbH & Co. KG
All rights reserved.
Reproduction without permission is prohibited.
Advertisement
Table of Contents
Related Manuals for Weidmuller IE-SW-PL06M-2TX-4PoE
Summary of Contents for Weidmuller IE-SW-PL06M-2TX-4PoE
- Page 1 Ethernet PoE Switch - Premium Line IE-SW-PL06M-2TX-4PoE (Managed) Hardware Installation Guide Second Edition, October 2012 1254050000/01/10.12 Please note: This document, the detailed manual and any further product information - if available - can be downloaded at the internet link: http://www.weidmueller.com/downloads...
-
Page 2: Package Checklist
Overview The IE-SW-PL06M-2TX-4PoE is a managed redundant Ethernet switch that comes standard with 4 10/100BaseT(X) 802.3at/af (PoE/PoE+) compliant Ethernet ports and 2 10/100BaseT(X) Ethernet ports. The PoE Switch provides up to 30 watts of power per PoE port, and allow power to be... - Page 3 Panel Layout of IE-SW-PL06M-2TX-4PoE IE-SW-PL06M-2TX-4PoE Front Panel View Grounding screw Terminal block for power input PWR1/PWR2 and relay output Heat dissipation orifices Console port DIP switches Power input PWR1 LED Power input PWR2 LED Fault LED MSTR/HEAD LED indicator 10. CPLR/TAIL LED indicator 11.
-
Page 4: Mounting Dimensions
DIN-Rail Mounting The aluminum DIN-Rail attachment plate should already be fixed to the back panel of the IE-SW-PL06M-2TX-4PoE when you take it out of the box. If you need to reattach the DIN-Rail attachment plate to the switch, make sure the stiff metal spring is situated towards the top, as shown by the following figures. -
Page 5: Wiring Requirements
Wiring Requirements WARNING Do not disconnect modules or wires unless power has been switched off or the area is known to be non-hazardous. The devices may only be connected to the supply voltage shown on the type plate. The devices are designed for operation with a Safety Extra-Low Voltage. -
Page 6: Grounding The Ethernet Switch
Wiring the Relay Contact The IE-SW-PL06M-2TX-4PoE has two sets of relay outputs-relay 1 and relay 2. Each relay contact uses two contacts of the terminal block on the top panel. Refer to the next section for detailed instructions on how to connect the wires to the terminal block connector, and how to attach the terminal block connector to the terminal block receptor. -
Page 7: Wiring The Digital Inputs
Wiring the Digital Inputs The IE-SW-PL06M-2TX-4PoE has two sets of digital inputs, DI 1 and DI 2. Each DI consists of two contacts of the 6-pin terminal block connector on the top panel, which are used for the two DC inputs. The top and front views of one of the terminal block connectors are shown here. - Page 8 “Turbo Ring” DIP Switch Settings DIP 1 DIP 2 DIP 3 DIP 4 ON: Enables this ON: Enables the ON: Activates default “Ring Ethernet Switch DIP switches 1, Reserved for as the Ring Coupling” ports. 2, 3 to configure future use. “Turbo Ring”...
-
Page 9: Led Indicators
LED Indicators The front panel of the IE-SW-PL06M-2TX-4PoE contains several LED indicators. The function of each LED is described in the following table: Color State Description Power is being supplied to power input PWR1 AMBER Power is not being supplied to power input P1. -
Page 10: Auto Mdi/Mdi-X Connection
10/100BaseTX ports to any kind of Ethernet device, without needing to pay attention to the type of Ethernet cable being used for the connection. This means that you can use either a straight-through cable or cross-over cable to connect the IE-SW-PL06M-2TX-4PoE to Ethernet devices. Specifications Technology IEEE802.3, 802.3u, 802.3x, 802.1D, 802.1w,... - Page 11 Connection 2 removable 6-Contact terminal blocks Reverse Polarity Present Protection Physical Characteristics Casing IP30 protection, metal case Dimensions (W x H x D) 80 x 135 x 131.5 mm(3.15 x 5.31 x 5.18 in) Weight 1110g Installation DIN-Rail, Wall Mounting Environmental Operating Temperature 0 to 60°C (32 to 140°F)
- Page 12 Contact Information Weidmüller Interface GmbH & Co. KG Postfach 3030 32760 Detmold Klingenbergstraße 16 32758 Detmold Germany Phone +49 (0) 5231 14-0 Fax +49 (0) 5231 14-2083 E-Mail info@weidmueller.com Internet www.weidmueller.com - 12 -...