Rear Foot Brake Lever Hight Adjustment - Tao Motor G 200 Owner's Manual

REAR FOOT BRAKE LEVER HEIGHT ADJUSTMENT
It is recommended that brake service is conducted by a certified Tao Motor technician. See your Tao Motor Dealer for details.
The rear brake lever's reach should be checked and then adjusted at the intervals specified in the periodic maintenance and lubrication
chart. The brake lever reach should measure from the top of the foot rest to the bottom of the brake lever peddle.
63.5 mm (2.5 In) as shown.
To adjust rear brake lever:
1. Remove right side foot rest.
2. Loosen locknut (#2)
3. Turn master cylinder plunger rod (#1) clockwise to raise brake lever or counter clockwise to lower the lever.
4. Tighten lock nut (#2).
5. Reinstall foot rest.
Operating the vehicle with improperly adjusted brakes can lead to a loss in braking stopping ability and
can cause an accident. Brakes can become very hot during prolonged braking or use. Never touch brakes
until they are cool.
1.
2.
25
1. Master Cylinder Plunger Rod
2. Lock Nut
Brake Lever Height