Main Switch - Tao Motor G 200 Owner's Manual

MAIN SWITCH

Engine Start/Stop Switch
Use this switch to "Stop" the engine in an emergency situation.
The engine will not start when this switch is set to this position.
Set this switch to "Run" position before starting the engine.
START BUTTON
Push start button to crank the engine with starter. See the starting instructions on page 18 before
starting the engine.
HEADLIGHTS
This G 200 ATV is equipped with High, Low, Strobe headlight features.
When ignition key is set to the " On " potion press the headlight switch to turn on headlights and to
toggle through modes.
THROTTLE
Once the engine is running, push the throttle lever to increase the engine speed. Regulate the speed of the ATV by varying the throttle
position. The throttle lever is spring-loaded to return to the start position when let go. Before starting the engine, make sure the throttle
lever is smooth in operation and will return to the start position. If throttle lever is not smooth in operation or will not return to start
position do not start engine.
Never operate this ATV with headlights set to "Low" or Strobe mode.
Always ride this ATV with the headlights set in the "High" position.
4
1. Headlight Switch
2. Engine Run/Stop Switch
3. Engine Start Button