Tao Motor G 200 Owner's Manual page 64

DRIVE CHAIN ADJUSMENT
To adjust the drive chain slack
1. Loosen axle carrier/housing pinch bolts and nuts( #2,3).
2. Loosen brake caliper mounting bracket bolt (#1).
TIP
For all Tao Motor models equipped with chain tensioner, always do the following; lift and hold the chain
tension off the chain to release chain tension until the chain adjustment is completed.
1. Brake Caliper Mounting Bracket Bolt
2. Carrier Pinch Bolts
3. Carrier Pinch Bolt Nuts
54