Speed Limiter - Tao Motor G 200 Owner's Manual

SPEED LIMITER

The G 200 ATV is equipped with a vehicle speed limiter adjusting screw. Beginning riders should start with
slowest setting to learn how to control this vehicle. Once the operator has demonstrated mastery of the ATV,
the supervising adult can adjust speed limiter screw to increase the top speed . The vehicle speed limiter keeps
the throttle from fully opening, even when the throttle lever is pushed to the maximum. The adjusting
screw may be gradually turned out as the beginner becomes more familiar with operating this ATV.
NOTICE
SPEED LIMITER
ADJUSTMENT
To increase top speed
1. Loosen locknut (#1).
2. To increase the top speed of the ATV turn the adjustment screw counter
clockwise. (#2).
3. Tighten the locknut to set adjustment screw in desired position(#1).
To decrease top speed
1. Loosen locknut (#1).
2. To decrease the top speed of the ATV turn the adjustment screw clockwise. (#2).
3. Tighten the locknut to set adjustment screw in desired position(#1).
FRONT BRAKE LEVER
The front brake lever is located on the right handlebar. To apply the front brake, pull the brake lever toward
the handlebar grip.
REAR FOOT BRAKE LEVER
The rear foot brake lever is located on the right foot rest . To apply the rear brake, push the brake with your
right foot toward the ground.
The adjustable speed limiter screw must be installed for operation. Failure to install a speed limiter
screw may result in water or dirt ingestion and potential damage to the vehicle.
Adults should always limit maximum restricted
speed within the ability and capacity of the
operator to operate the ATV safely. Never allow
children to adjust the speed limiter screw.
6
1. Locknut
2. Adjustment
Screw
3. Adjustment
Range