Tao Motor G 200 Owner's Manual page 54

GENERAL MAINTENANCE AND LUBRICATION CHART CONTINUED
No. ITEM
8 Wheel Hub
Bearings*
9 Chassis
Fasteners*
10 Shock Absorber
Assemblies*
Stabilizer
11
Bushings *
12 Rear Knuckle
Pivots*
13 Steering Shaft*
14 Steering System*
15 Engine Mount*
16 Engine Oil
CHECK OR
MAINTENANCE JOB
• Check for looseness or damage, and replace if necessary.
• Make sure that all nuts, bolts, and screws are properly tightened.
• Check operation and correct if necessary.
• Check for oil leakage and replace if necessary.
• Check for cracks or other damage, and replace if necessary.
• Lubricate with lithium-soap-based grease.
• Lubricate with lithium-soap-based grease.
• Check operation and repair or replace if damaged.
• Check toe-in and adjust if necessary.
• Check for cracks or other damage, and replace if necessary.
• Change.
• Check ATV for oil leakage, and correct if necessary.
WHICHEVER COMES FIRST
Month
km (mi) 320
(200)
Hours
44
INITIAL EVERY
1 3 6 6
1300 2500 2500
(800) (1600) (1600)
20 80 160 160
  

   
 
 
 
 
   
 

CHANGE OIL EVERY 20 HRS
12
5000
(3200)
320







