Battery - Tao Motor G 200 Owner's Manual

BATTERY

Battery Removal
1. Make sure the ignition switch is set to the "OFF" position.
2. Remove seat
3. Disconnect the negative cable from the battery by unscrewing battery terminal bolt.
4. Disconnect the positive cable from the battery by unscrewing battery terminal bolt.
5. Remove battery from battery tray .
Battery Installation
1. Insert battery into battery tray with battery terminal nuts and bolts already
installed on the battery.
2. Remove battery terminal bolts.
3. Connect positive cable and re-screw battery terminal bolt.
4. Connect negative cable and re-screw battery terminal bolt.
5. Reinstall seat.
NOTICE
TIP
Battery electrolyte is poisonous and dangerous, acid contains sulfuric acid, which can cause severe burns. Avoid contact with skin, eyes
or clothing. Always shield your eyes when working near batteries.
EXTERNAL: Flush with water.
INTERNAL: Call a physician Immediately and get medical attention.
EYES: Rush with water for 15 minutes and get prompt medical attention.
Batteries produce explosive gases. Keep sparks, flame, cigarettes or other sources of ignition away. Ventilate when charging or using in
an enclosed space.
KEEP OUT OF REACH OF CHILDREN.
Positive (+) cable is red in color.
Negative(-) Cable is in black in color.
This G 200 ATV has two positive (+) cables red in
color. Both attach to positive terminal on the battery .
Battery ( 9 Amp )
12