Engine Idle Adjustment - Tao Motor G 200 Owner's Manual

ENGINE IDLE ADJUSTMENT

If it is necessary to adjust the carburetor idle screw due to changed outside environmental conditions, to adjust carburetor
idle screw as follows;
1. Apply parking brake.
2. Warm up the engine by running the vehicle.
3. Adjust the carburetor idle screw until the desired idle RPM is reached. Turning the idle screw in (clockwise) to raise RPM.
Turning the screw out (counterclockwise) will lower RPM.
4. The standard idle RPM is 1500 ±150.
Idle Screw
26