Speed Limiter - Tao Motor Boulder B1 Owner's Manual

SPEED LIMITER

The Boulder B1/ B110 ATV is equipped with a vehicle speed limiter adjusting screw. Beginning riders should
start with slowest setting to learn how to control this vehicle. Once the operator has demonstrated mastery
of the ATV, the supervising adult can adjust speed limiter screw to increase the top speed . The vehicle speed
limiter keeps the throttle from fully opening, even when the throttle lever is pushed to the maximum. The
adjusting screw may be gradually turned out as the beginner becomes more familiar with operating this ATV.
NOTICE
SPEED LIMITER ADJUSTMENT
To increase top speed
1. Loosen locknut (#1).
2. To increase the top speed of the ATV turn the adjustment screw counter
clockwise. (#2).
3. Tighten the locknut to set adjustment screw in desired position(#1).
To decrease top speed
1. Loosen locknut (#1).
2. To decrease the top speed of the ATV turn the adjustment screw clockwise. (#2).
3. Tighten the locknut to set adjustment screw in desired position(#1).
FRONT BRAKE LEVER
The front brake lever is located on the right handlebar. To apply the front brake, pull the brake lever toward the
handlebar grip.
REAR FOOT BRAKE LEVER
The rear foot brake lever is located on the right foot rest . To apply the rear brake, push the brake with your
right foot toward the ground.
The adjustable speed limiter screw must be installed for operation. Failure to install a speed limiter
screw may result in water or dirt ingestion and potential damage to the vehicle.
Adults should always limit maximum restricted
speed within the ability and capacity of the child to
operate the ATV safely. Never allow the child to
adjust the speed limiter screw.
7
1. Locknut
2. Adjustment Screw
3. Adjustment Range