Paper Sizes - Canon TZ-5300 Online Manual

Paper Sizes

Rolls
Rolls that meet the following conditions are supported.
• Outer diameter is 6.9 inches (175 mm) or less •
• • Inner diameter of paper core: 2 or 3 inches
• • Printing side out
Roll Paper Width
Roll paper width recommended for borderless
printing(*1,*2)
Minimum Paper Length
Maximum Printable Length
Thickness
*1:Borderless printing may not be available depending on the media type. For details on media types that
can be used for borderless printing, see "Paper Information List."
*2:You can perform borderless printing without specifying Roll paper width recommended for it. As
opposed to standard borderless printing, there will be a small margin on the left and right because the
paper width is set a little bit smaller than the width of the document.
Sheets
Sheets of the following sizes are supported.
Sheet Width
Minimum Paper Length
Maximum Printable Length
Thickness
36.11 in. (917.0 mm) to 8.00 in. (203.2 mm)
36 in Roll (914.4mm)
A0/A1 Roll (841.0mm)
B1/B2 Roll (728.0mm)
24 in Roll (609.6mm)
A1/A2 Roll (594.0mm)
B2/B3 Roll (515.0mm)
17 in Roll (431.8mm)
14 in Roll (355.6mm)
10 in Roll (254.0mm)
Front output: 8.00 in. (203.2 mm)
Top output: 8.08 in. (205.0 mm)
59 feet (18 m)
depends on the OS and application.
3 mil (0.07 mm) to 31 mil (0.8 mm)
36.11 in. (917.0 mm) to 8.00 in. (203.2 mm)
8.00 in. (203.2 mm)
24.02 in. (610.0 mm)
3 mil (0.07 mm) to 31 mil (0.8 mm)
91