Canon TZ-5300 Online Manual page 243

Selecting Enable allows you to receive the WSD printing data faster.
Timeout settings
Specifies the timeout length.
◦ ◦ Bonjour settings
Setting items when you use Bonjour.
Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
You cannot use the same service name as that already used for other LAN connected
devices.
◦ ◦ SNTP settings
Performs various settings for SNTP (Simple Network Time Protocol).
◦ ◦ Spanning tree settings
Enables/Disables spanning tree. Selecting Enable avoids circulating data on a network.
◦ ◦ LPR protocol settings
Enables/Disables the LPR setting.
◦ ◦ RAW protocol
Enables/Disables RAW printing.
◦ LLMNR ◦
Specifies ON/OFF of LLMNR (Link-Local Multicast Name Resolution). Selecting ON allows the
printer to detect printer's IP address from the printer name without a DNS server.
◦ Gigabit Ethernet settings ◦
Specifies the communication speed and communication method when using Gigabit Ethernet.
◦ Use Dedicated Port ◦
Selects whether to use a dedicated port for a command sent from a Canon application to the printer.
Selecting ON allows you to use the dedicated port.
◦ IPP settings ◦
Selecting Enable allows you to print via the network with the IPP protocol.
If you use the security print function when printing using IPP protocol in AirPrint etc., select Enable
for Security Print.
◦ Wi-Fi DRX settings ◦
Selecting Enable allows you to activate discontinuous reception when using Wi-Fi.
◦ ◦ Wired LAN DRX settings
243