Specifying The Amount Of Extension For Borderless Printing - Canon TZ-5300 Online Manual

Specifying the Amount of Extension for Borderless Printing

Borderless printing may leave margins on the left and right sides of the paper or soil the back of the paper.
Adjusting the amount of extension may improve these problems.
Each paper width is shown as being a recommended width for borderless printing ( Paper with
recommended width ), or as having sufficient width for borderless printing ( Paper of sufficient width ).
The procedure for setting the amount of protrusion differs between Paper with recommended width and
Paper of sufficient width.
Specifying Amount of Extension for Paper with recommended width.
Specifying Amount of Extension for Paper of sufficient width.
For more information on a paper width recommended for borderless printing, see
Specifying Amount of Extension for Paper with recommended width.
1. 1. Tap paper setting display area on HOME screen.
2. 2. Tap area.
3. 3. Tap Paper settings.
4. Tap Advanced setup. 4.
5. 5. Tap Extension for borderless printing.
6. 6. Tap Paper with recommended width.
7. 7. Select amount of extension.
Select Large, Standard, or Small.
Note
• • When selecting Large, the printed area will be wider. Select this if there are margins.
• • When selecting Small, the printed area will be narrower. Select this if there are stains.
132
Paper Sizes.