Canon TZ-5300 Online Manual page 251

◦ ◦ Roll paper setting 7
Select whether 600 mm or 24 in. is applied when a roll of an intermediate size is detected.
• • Keep margin at cut sheet end
When printing on the sheet using AirPrint, selecting Enable sets the trailing edge of the paper to 20 mm.
Select Enable if printing on the trailing edge of the paper is disturbed.
• • Print advanced paper settings
Tapping Yes prints out each setting specified in Advanced paper settings.
• • Add priority roll paper width
When paper size is detected, set the width of the roll paper to be recognized first. Judge in order from 1
in the list.
• Reset all detection priority data •
Resets estimated data for all learned paper when Auto detect or Auto with confirmation is selected in
Media type selection method.
• Reset paper settings for all paper •
Tapping Yes initializes each setting specified in Advanced paper settings.
Entering the administrator password is required if it is enabled.
Important
• • Estimated data for all learned paper when Auto detect or Auto with confirmation is selected in
Media type selection method
• • Selection log in paper type.
251