Canon TZ-5300 Online Manual page 437

A test pattern is printed.
7. 7. Examine the test pattern to measure the scale and calculate the discrepancy.
The scale bar prints "Millimeter" in 50 mm increments and "Inch" in 1-inch increments.
8. 8. Tap amount of discrepancy.
If the scale is shorter than the actual size, use a positive setting value.
If it is longer, use a negative value.
The feed amount can be adjusted in 0.02% increments.
A test pattern is printed.
9. 9. Repeat steps 7 and 8.
The adjustment value is now registered, and adjustment is complete.
Adjusting Feed Amount (Front)
Items to Prepare
When Using Rolls • An unused roll at least 254.0 mm (10.00 in) wide
• High-precision ruler
When Using Sheets • One sheet of unused paper of at least A4/Letter size
• High-precision ruler
Follow the procedure below to adjust.
1. Load paper. 1.
Loading Rolls in the Printer
Loading Sheets in the Printer
Important
• Always make sure the loaded paper matches the type of paper specified. •
Adjustment cannot be completed correctly unless the loaded paper matches the settings.
2. 2. Flick HOME screen and tap
Home Screen Menu Composition
3. 3. Tap Paper feed adjustment.
Maintenance.
437