Canon TZ-5300 Online Manual page 652

5. 5. Select a method for printing borderless
Select Print Image with Actual Size in Borderless Printing Method.
6. 6. Complete the setting process
Click OK.
If you print, the document is printed in the original size without white borders.
Important
• If Amount of Extension is set to the second from the right, create the source document with a
size 2mm larger on each of the top, bottom, left and right sides than the size of the paper you wish
to print.
Important
• If you place a checkmark next to the Borderless Printing option, the Page Layout and Print Centered
options in the Layout tab will be displayed in gray out and you will not be able to configure them.
• Depending on paper size, the length/width ratio of the paper may be different from that of the image,
making it impossible for the whole image to fit on the paper.
When this happens, crop the image with the application software to match paper size.
• When printing borderless, printing may stop abruptly and the paper will be cut causing a slight color
unevenness on the edges of the paper. If you require exceptionally high quality, in the Roll Paper
Options dialog box select No from the Automatic Cutting list. When you do so, the document will be
printed without the left and right margins. After the printed material has exited the printer and has been
cut, cut the upper and lower edges with a pair of scissors.
• When printing borderless on paper with low ink-fixing properties, depending on frequency of use, the
cutter unit may come into contact with the paper surface scratching it and causing the paper to be
unevenly cut.
You may be able to improve the situation by clicking Specify... on the Main tab and, in the Paper
Detailed Settings dialog box, under Drying Time, set Between Pages to a higher value.
• If you print borderless while Automatically switch paper sources (paper size priority) in the Device
Settings tab is on, in the Page Setup tab, under Borderless Printing Method, you will only be able
to select Scale to fit Roll Paper Width. In such cases, paper roll 1 (the paper roll in the upper tray)
will be normally used for printing. If the size, or the type, of the paper set in roll 1 is not compatible with
borderless printing, you will not be able to print borderless.
• If the following paper is selected for Roll Paper Width, margins may be formed on the left and right of
the document even when borderless printing is set.
34 in Roll (863.6mm)
800mm Roll (800.0mm)
30 in Roll (762.0mm)
600mm Roll (600.0mm)
22 in Roll (558.8mm)
20 in Roll (508.0mm)
500mm Roll (500.0mm)
18 in Roll (457.2mm)
A2/A3 Roll (420.0mm)
16 in Roll (406.4mm)
15 in Roll (381.0mm)
652