Connecting A Modem Cable - HP Compaq NC4000 Hardware And Software Manual

Modem and Networking

Connecting a Modem Cable

To connect a modem cable:
Å
WARNING: To avoid the risk of electrical shock, fire, or damage
to the equipment, do not plug a modem cable into the network jack.
1. If the modem cable contains noise suppression circuitry,
which prevents interference from TV and radio reception,
orient the circuitry end of the cable toward the notebook.
2. Plug the modem cable into the RJ-11 (modem) jack 1 on
the notebook.
3. Plug the other end of the modem cable into the RJ-11
telephone jack 2.
For more information about using the modem or about using
AT commands and dial modifiers, refer to the Modem and
Networking guide or the Modem Command Guidelines
(Advanced Users Only) provided in English on the Notebook
Documentation CD.
10–2 Hardware and Software Guide