Using Emergency Shutdown Procedures; Power Options - HP Compaq NC4000 Hardware And Software Manual

Using Emergency Shutdown Procedures

Ä
CAUTION: Emergency shutdown procedures result in the loss of
unsaved data.
If the notebook is unresponsive and you are unable to use normal
Microsoft
emergency procedures in the sequence provided:
■
Press
■
Press and hold the power/standby button for at least
5 seconds.
■
Disconnect the notebook from external power and remove
the battery pack. For more information about removing
and storing the battery pack, refer to the
Pack"

Power Options

Many default power settings can be changed in the Power
Options window. For example, you can set an audio alert to
warn you when the battery pack reaches a low-power condition,
or you can change the default settings for the power/standby
button.
By default, when the notebook is on:
■
Pressing the
■
The display switch initiates standby. The display switch
is activated by closing the display.
Hardware and Software Guide
Windows® shutdown procedures, try the following
®
ctrl+alt+delete.
section, later in this chapter.
hotkey initiates standby.
fn+f3
Select Shut Down.
"Storing a Battery
Power
2–13