Entering A Power-On Password - HP Compaq NC4000 Hardware And Software Manual

Hp compaq notebook series
Hide thumbs Also See for Compaq NC4000:
Table of Contents

Advertisement

Security
3. Open Computer Setup by turning on or restarting the
notebook. Press
message is displayed in the lower-left corner of the screen.
4. Use the arrow keys to select Security > Power-On
password, and then press
5. To save your preferences, use the arrow keys to select File >
Save Changes and Exit. Then follow the instructions on the
screen.
Your preferences are set when you exit Computer Setup and take
effect when the notebook restarts.

Entering a Power-On Password

At the power-on password prompt, type your password, and then
press
enter.
password, you must restart the notebook and try again.
12–10
f10
To change the language, press
For navigation instructions, press
To set a power-on password, type the password in the
New Password and Verify New Password fields, and
then press
f10.
To change a power-on password, type the current
password in the Old Password field, type the new
password in the New Password and Verify New
Password fields, and then press
To delete a power-on password, type the current password
in the Old Password field, and then press
After three unsuccessful attempts to enter the
while the "F10 = ROM Based Setup"
f2.
enter.
Hardware and Software Guide
f1.
f10.
f10.

Advertisement

Table of Contents
loading

Table of Contents