Installing Software - HP Compaq NC4000 Hardware And Software Manual

Hp compaq notebook series
Hide thumbs Also See for Compaq NC4000:
Table of Contents

Advertisement

Installing Software

To install software included with the notebook on a disc:
1. Insert an appropriate optical drive into an external MultiBay
or MultiBay II. Refer to the
section in
2. Connect the notebook to a reliable electrical outlet.
3. Close any open applications.
4. Insert a software disc into the optical drive.
5. When the installation wizard is displayed, follow the
installation instructions on the screen.
6. Restart the notebook if prompted.
Repeat the installation procedure for all software you want
to install.
WinDVD Creator has special drive requirements for proper
installation. To install WinDVD Creator, refer to the instructions
provided with the InterVideo WinDVD Creator disc.
Hardware and Software Guide
Chapter 5, "Drives."
If autorun is enabled an installation wizard is displayed.
If autorun is disabled, select Start > Run. Enter:
x:\setup.exe
(where x is your optical drive designation), and then
select OK.
"MultiBay II Optical Drive"
Multimedia
4–9

Advertisement

Table of Contents
loading

Table of Contents