Removing A Primary Battery Pack - HP Compaq NC4000 Hardware And Software Manual

Removing a Primary Battery Pack

Ä
CAUTION: To prevent loss of work when removing a battery pack that
is the sole power source, initiate hibernation or turn off the notebook
before removing the battery pack. If you are not sure whether the
notebook is off or in hibernation, briefly press the power/standby
button. Then shut down the notebook through the operating system.
To remove a primary battery pack:
1. Turn the notebook upside down with the primary battery bay
facing you.
2. Press the battery locking latch to the right 1. (The right side
of the battery will eject slightly.)
3. Press and hold the battery release latch to the right 2 and
slide the battery pack out of the notebook 3.
Hardware and Software Guide
Power
2–21