Using Hotkey Commands - HP Compaq NC4000 Hardware And Software Manual

Pointing Devices and Keyboard

Using Hotkey Commands

Initiating Standby (fn+f3)
When the notebook is on, press the
standby. When standby is initiated, your work is saved in random
access memory (RAM), the screen is cleared, and power is
conserved. While the notebook is in standby, the power/standby
light blinks.
To resume from standby:
»
Press the power/standby button.
The
fn+f3
function of the
Windows, can be changed. For example, the
be set to initiate hibernation instead of standby. For more
information about standby, hibernation, and changing the
function of the
3–8
hotkey is set at the factory to initiate standby. The
hotkey, called the "sleep button" in
fn+f3
hotkey, refer to
fn+f3
hotkey to initiate
fn+f3
fn+f3
Chapter 2, "Power."
Hardware and Software Guide
hotkey can