Removing An Optical Disc (With Power) - HP Compaq NC4000 Hardware And Software Manual

Hp compaq notebook series
Hide thumbs Also See for Compaq NC4000:
Table of Contents

Advertisement

Removing an Optical Disc (With Power)

If power is available:
1. Turn on the notebook.
2. Press the release button 1 on the drive bezel to release
the media tray, and then pull the tray 2 out until it is fully
extended.
3. Remove the disc 3 from the tray by gently pressing down on
the spindle while lifting the outer edges of the disc. (Handle
the disc by the edges, not the flat surfaces. If the media tray
is not fully extended, tilt the disc as you remove it.)
4. Close the media tray and place the disc in a protective case.
Hardware and Software Guide
Drives
5–15

Advertisement

Table of Contents
loading

Table of Contents