HP Compaq NC4000 Hardware And Software Manual page 38

Power
Task
Turn off the
notebook.*
Turn off the
display while the
power is on.
*If the system is unresponsive and you are unable to shut down the notebook
with these procedures, refer to the
section, later in this chapter.
2–10
Procedure
Save your work and close all
open applications. Then:
■ Press the power/standby
button, and then follow
the on-screen instructions
(if displayed) for shutting
down the notebook.
– or –
■ Shut down the notebook
through the operating
system using one of the
following procedures:
❐ Select Start > Turn Off
Computer > Turn Off.
❐ Press the Windows logo
key, and then select Turn
Off Computer >
Turn Off.
Close the notebook.
"Using Emergency Shutdown Procedures"
Result
■ The power/standby
lights are turned off.
■ The operating
system is shut down.
■ The notebook is
turned off.
Closing the notebook
activates the display
switch, which initiates
standby. This conserves
battery power.
Hardware and Software Guide