Using A Modem (Select Products Only); Connecting A Modem Cable - HP ProBook 450 G2 User Manual

2. Plug the other end of the network cable into a network wall jack (2) or router.
NOTE:
TV and radio reception, orient the circuitry end of the cable toward the computer.

Using a modem (select products only)

A modem must be connected to an analog telephone line using a 6-pin, RJ-11 modem cable. In some
countries or regions, a specific modem cable adapter is also required. Jacks for digital PBX systems may
resemble analog telephone jacks, but they are not compatible with the modem.

Connecting a modem cable

To connect the modem cable, follow these steps:
1. Plug the modem cable into the modem jack (1) on the computer.
2. Plug the modem cable into the RJ-11 telephone wall jack (2).
NOTE:
TV and radio reception, orient the circuitry end of the cable toward the computer.
If the network cable contains noise suppression circuitry (3), which prevents interference from
If the modem cable contains noise suppression circuitry (3), which prevents interference from
Connecting to a wired network 33