Entering A Drivelock Password; Requiring A Drivelock Password At Restart - HP Compaq NC4000 Hardware And Software Manual

Hp compaq notebook series
Hide thumbs Also See for Compaq NC4000:
Table of Contents

Advertisement

Security

Entering a DriveLock Password

1. Be sure that the hard drive is inserted into the notebook
(not into an optional docking device or external MultiBay).
2. When prompted for a DriveLock password, type your user
or master password (using the same kind of keys you used
to set the password), and then press
After two incorrect attempts to enter the password, you must
restart the notebook and try again.

Requiring a DriveLock Password at Restart

You can require that a DriveLock password be entered each
time the notebook is restarted. Enable and disable this feature
in Computer Setup.
1. Shut down the notebook. If you are not sure whether the
notebook is off or in hibernation, turn the notebook on by
pressing the power/standby button, and then shut down the
notebook through the operating system.
2. Be sure that the hard drive is inserted into the notebook
(not into an optional docking device or external MultiBay).
3. Open Computer Setup by turning on or restarting the
notebook. Press
message is displayed in the lower-left corner of the screen.
12–14
f10
To change the language, press
For navigation instructions, press
while the "F10 = ROM Based Setup"
f2.
Hardware and Software Guide
enter.
f1.

Advertisement

Table of Contents
loading

Table of Contents