Table of Contents
Advertisement
9
Modem and LAN
Using a modem
The modem must be connected to an analog telephone line by using a 6-pin, RJ-11 modem cable
(purchased separately). In some countries or regions, a specific modem cable adapter is also
required. Jacks for digital PBX systems may resemble analog telephone jacks, but they are not
compatible with the modem.
WARNING!
modem. Immediately disconnect the modem cable if you accidentally connect it to a digital line.
If the modem cable contains noise suppression circuitry (1), which prevents interference from TV and
radio reception, orient the circuitry end (2) of the cable toward the computer.
Connecting a modem cable
WARNING!
modem or telephone cable into the RJ-45 (network) jack.
To connect a modem cable, follow these steps:
1.
Connect the modem cable into the modem jack (1) on the computer.
42
Chapter 9 Modem and LAN
Connecting the internal analog modem to a digital line can permanently damage the
To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a
Advertisement
Table of Contents
