Primary Memory Module Slot - HP Compaq NC4000 Hardware And Software Manual

Primary Memory Module Slot

Å
WARNING: Failure to unplug the power cord and remove all battery
packs before installing a memory module can damage the equipment
and expose you to the risk of electrical shock.
Ä
CAUTION: Electrostatic discharge (ESD) can damage electronic
components. Before beginning any procedure, ensure that you are
discharged of static electricity by touching a grounded metal object.
For more information, refer to the Regulatory and Safety Notices guide
on the Notebook Documentation CD.
To add a memory module to the primary memory module slot:
1. Save your work and shut down the notebook. If you are
unsure whether the notebook is off or in hibernation, turn
the computer on and then shut it down through the operating
system.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove any battery packs from the notebook.
Hardware and Software Guide
Memory Modules
8–7