Omron NX-PA Series User Manual page 63

2) Operation Check on
Controller
3) Actual Controller
Operation
*1. Use the Synchronize Menu of the Sysmac Studio to download the project.
NX-series CPU Unit Hardware User's Manual (W535)
1. Check the wiring by using forced
refreshing of real I/O from the I/O Map
or Watch Tab Page.
2. For motion control, use the MC Test
Run operations in PROGRAM mode
to check the wiring. Then check the
motor rotation directions for jogging,
travel distances for relative
positioning (e.g., for electronic gear
settings), and homing operation.
3. Change the Controller to RUN mode
and check the operation of the user
program.
Start actual operation.
1 Introduction to NX-series Controllers
--- NJ/NX-series CPU Unit Soft-
ware User's Manual (Cat. No.
W501)
---
1
---
1 - 17