Versions; Checking Versions - Omron NX-PA Series User Manual

Versions

Hardware revisions and unit versions are used to manage the hardware and software in NX-series
Units and EtherCAT slaves.
The hardware revision or unit version is updated each time there is a change in hardware or software
specifications. Even when two Units or EtherCAT slaves have the same model number, they will have
functional or performance differences if they have different hardware revisions or unit versions.

Checking Versions

You can check versions in the ID information indications on the product or with the Sysmac Studio.
Checking Unit Versions on ID Information Indications
The unit version is given on the ID information indication on the side of the product.
The ID information on an NX-series NX701-00 CPU Unit is shown below.
Note The hardware revision is not displayed for the Unit that the hardware revision is in blank.
NX-series CPU Unit Hardware User's Manual (W535)
ID information indication
Lot number Serial number
LOT No. DDMYY xxxx
PORT1 :
PORT2 :
MAC address
Versions
Unit version
Ver.1.
HW Rev.
Hardware version
31