Omron NX-PA Series User Manual page 116

4 Installation and Wiring
1
Unlock the DIN Track mounting hook.
Use a flat-blade screwdriver to pull up the DIN Track mounting hook on the CPU Module to
unlocked position.
At this point, be sure not to drop the CPU Module.
2
Remove the CPU Module from the DIN Track.
(1) Press the dropout prevention lock release lever on the front left side of the Power Supply
Unit to release the dropout prevention lock.
(2) Press and hold the release lever, pull the CPU Module straight forward to remove it.
4 - 28
(1)
(2)
NX-series CPU Unit Hardware User's Manual (W535)