Removing/Inserting A Drive In The Armada 7000 Removable Drive Multibay Adapter - HP Armada 7300 Reference Manual

Removing/Inserting a Drive in the Armada 7000
Removable Drive MultiBay Adapter
An Armada 7000 Removable Drive MultiBay Adapter is supplied
with the computer CD-ROM drive models and with Armada 7300
20X Max CD-ROM drive option kits.
There are two models of the MultiBay adapter. One model has a
release latch on the right side, and the other model has two release
latches on the bottom. You may have either model.
The adapter is not needed to insert an Armada 7300 removable
drive into the Armada 7300 computer MultiBay. Before inserting
a removable drive into the computer MultiBay, follow the steps in
this chapter to remove the drive from the adapter model that you
have.
When the adapter is not being used, protect it by placing it
NOTE:
into the MultiBay device carrying case. When a CD-ROM drive or
diskette drive is out of a MultiBay, protect it by inserting it into
the MultiBay adapter, then into the MultiBay device carrying case.
The adapter is needed to insert an Armada 7300 removable drive
into a MultiBay of the ArmadaStation, Armada MiniStation EX,
or Armada 7700 computer. With the adapter, the following
Armada 7300 removable drives can be used in Armada 7000
MultiBays:
Diskette drive in the ArmadaStation, Armada MiniStation EX,
or Armada 7700 computer
20X Max CD-ROM drive in the ArmadaStation or Armada
MiniStation EX
Before inserting a removable drive into one of the Armada 7000
MultiBays listed above, follow the steps in this chapter to insert
the drive into the adapter model that you have.
Working with Removable Drives 6-9