Replacing A Discharged Battery Pack - HP Armada 7300 Reference Manual

Replacing a Discharged Battery Pack

Removing a Battery Pack
To remove a discharged battery pack from the battery bay:
1. If the computer is on, save open files and initiate Suspend. The
power/suspend light begins blinking.
2. Tilt the computer up
3. Slide the battery release latch toward the back of the
computer
4. Place your hand under the battery pack and pull the battery
pack out of the battery bay
Removing the Battery Pack from the Battery Bay
5-6 Using Battery Packs
CAUTION:
To prevent loss of unsaved information when the
computer is on, save open files, initiate Suspend, then
immediately replace the discharged battery pack.
.
to locate the battery release latch.
.